Air shower is a widely used purification equipment in clean rooms and cleanrooms. When using an air shower, we often encounter various problems. In this issue, we will tell you how to deal with situations where there is no air blowing during the use of an air shower?
When encountering such situations, do not panic and quickly check the air shower room using the following four methods:
Step 1, check the control panel of the air shower and observe whether the air shower is in emergency stop state.
The air shower in emergency stop state will not blow air. If the air shower is found to be in emergency stop state, the emergency stop button needs to be pressed to cancel.
Step 2, check if the door is properly connected
If the door is not closed properly, the air shower room will not blow air. This step can still be checked by referring to the control panel. If the door is closed, the label on the control panel will also be displayed.
Step 3, open the air shower door and check if the lock tongue and door magnet are damaged.
If the lock tongue and door magnet are damaged, it will cause the door to not close tightly, the electronic interlock function of the air shower room to fail, and there will be no blowing.
Step 4, check the induction switch
If the sensor does not light up, the air shower room will not blow air. This step can still be checked by referring to the control panel. If the sensing is successful, there will also be a label on the panel. If the sensor does not light up, you can solve the problem by moving the sensor position.
The above are the 4 methods for quick inspection. If all 4 methods have been checked and the air still does not blow, it is necessary to consider replacing the control panel.
